Turnaround and new construction welder here out of Houston Texas bro i gotta give you your credit where its due i passed so many tests from watchin your videos alone. I just signed up for a boilermaker union down here about to take my 6G tube test in August. You're right on time with this one. Also can you post an updated one with tig root 7018 feel and cap. Appreciate the tutorials bro if theres a way to support i will
Masterly and a joy to watch. Just the relaxed explanation to make it understandable to everyone is a gift for which my big thanks. Greetz from Holland, Marcel Knippers😃
@@Wifimoneyss I failed on the cap, had a bit of undercut because I didn’t let it cool enough and it ran hot. Take all the time they’ll give you cause stupid mistakes like that will cost you
I love all your videos! About to take a monster coupon test this morning. XXS 2 inch tig all the way and XXS 6inch tig/stick. Been watching many of your videos all night. What do you use to film these? Great arc shots!
I see some separation part between weld root at 5:18 . I don't know maybe i didn't see as well as i could the root. I think when you make a video for us you can't focus as much as you need. So i think this video was good enough. Thank you again bro ❤
@@Hamid-az Nah, he's fine. You can see while he's backfeeding/laywiring it, he's breaking down the bevelled edge. It's impossible to have an edge, because the edge physically broke away, and got replaced with the filler metal, that is what the Keyhole is, it's just the bevel breaking down. Could he be under and have suckback? Sure, but there will never be lack of penetration with a keyhole cause you can't have that with one.
@@DrCranberry Thank you for your explanation and guidance, dear friend. No doubt it is, and I just wanted to make sure because I'm learning. I wish you and channel X3M-TIG success.🙏❤️
I see you had a little under cut. I was welding in a coffin, down in the double bottom of a ship. I had to put the filler rod around the pipe, just the get a tack. Once I got it, i was good to go. It's better to let it cool down, I found. You do very nice work. Try standing on your head and weld this up, areal life application. Thanks
Hey bud, thanks for your comment. First of, there is no undercut, second, I don’t have to stand on my head to weld like that, because I did that a lot in my career, now I pick and choose what to weld or simply pass on welders like you! Remember, there is a fine line between confidence and arrogance, stay humble!
![[#2024MAMA] ROSÉ (로제), Bruno Mars - APT. | Mnet 241122 방송](http://i.ytimg.com/vi/dgGqD28J6aQ/mqdefault.jpg)
Passed my 6g tig stick pipe test a few months ago. Thanks for so many tips and videos, and many more to come 🍻
Thank you for your videos, you are an artist . every weld looks machine made.
Just passed my 6G Tig all the way out and Tig/7018 combo thanks for all the vids
Happy to hear that 💪👍
Your so good not only tig weld with constant feed but recording with another hand thanks for the videos
Thanks 👍
keep the good work we appreciate 🙏
Nice work. Thanks for the video
Turnaround and new construction welder here out of Houston Texas bro i gotta give you your credit where its due i passed so many tests from watchin your videos alone. I just signed up for a boilermaker union down here about to take my 6G tube test in August. You're right on time with this one. Also can you post an updated one with tig root 7018 feel and cap. Appreciate the tutorials bro if theres a way to support i will
You can do Thanks linked under the video! 😊
Hey brother, happy to hear that. If I ever get a chance I’ll do it !
Masterly and a joy to watch. Just the relaxed explanation to make it understandable to everyone is a gift for which my big thanks. Greetz from Holland, Marcel Knippers😃
Many thanks!👍
Perfect timing, attempting my first 6g tomorrow
Good luck 🤞
How’d u do my test is Friday and I’m touching up with every video I see without bad comments
@@Wifimoneyss I failed on the cap, had a bit of undercut because I didn’t let it cool enough and it ran hot. Take all the time they’ll give you cause stupid mistakes like that will cost you
@@ncdozer3103 thanks man
Beautiful work sir. Yes welds are signatures for sure. True professional work right there.
Thanks 👍
Love these tig videos !!
Perfect welding my brother 👍👍👍
Can you make a video of how you sharpened tungsten and what types of tungsten do you use ?
Good suggestion
I love all your videos! About to take a monster coupon test this morning. XXS 2 inch tig all the way and XXS 6inch tig/stick. Been watching many of your videos all night. What do you use to film these? Great arc shots!
Good luck!! Have fun 👍
I see some separation part between weld root at 5:18 . I don't know maybe i didn't see as well as i could the root.
I think when you make a video for us you can't focus as much as you need. So i think this video was good enough. Thank you again bro ❤
No separation, maybe little bit excessive on one spot.
@X3MTIG
Thank you bro. I'm sorry to saying that 🙏❤️
go ahead powerful. i always waiting for your new videos
@@Hamid-az Nah, he's fine. You can see while he's backfeeding/laywiring it, he's breaking down the bevelled edge.
It's impossible to have an edge, because the edge physically broke away, and got replaced with the filler metal, that is what the Keyhole is, it's just the bevel breaking down.
Could he be under and have suckback? Sure, but there will never be lack of penetration with a keyhole cause you can't have that with one.
@@DrCranberry
Thank you for your explanation and guidance, dear friend. No doubt it is, and I just wanted to make sure because I'm learning. I wish you and channel X3M-TIG success.🙏❤️
I think he saw that black slag line on the left and thought it was LOF
And now let's go to the comments. See what the experts have to say.😅😅😅
😂😂😂😂
Do you have a video for doing tie ins I’m struggling on those they come out flat
What heat you ran your root pass on
Can you recommend me a budget machine to practice tig at home $800 range thanks
Odakle si druze, rekao bih po naglasku da si sa Balkana.
Iz Hrvatske
How can I get a job like this after welding school?
Once you get your qualifications performance ticket, apply for a local job or join a local union.
what tungsten do you use?
hey men , are u passing by the haul this week by chance or u burning in a shutdown ?
Shutdown starts next week, so I’m getting ready!
more shots of your techniques where we can actually see your positioning and arm
What heat range
I don’t understand how fill to flush in one pass
Vary nice sir
❤❤❤❤❤❤❤
Thanks for the love! 💪
Красивый шов 👍
👏👏👏🤝🤝🤝
I see you had a little under cut. I was welding in a coffin, down in the double bottom of a ship. I had to put the filler rod around the pipe, just the get a tack. Once I got it, i was good to go. It's better to let it cool down, I found. You do very nice work. Try standing on your head and weld this up, areal life application. Thanks
Bro stfu go watch his other videos
Hey bud, thanks for your comment. First of, there is no undercut, second, I don’t have to stand on my head to weld like that, because I did that a lot in my career, now I pick and choose what to weld or simply pass on welders like you! Remember, there is a fine line between confidence and arrogance, stay humble!
The Jean-Claude Van Damme of welding! 🫡
Lol 😆